5/8-24 Barrel Thread Adapter for 1/2″ Barrels – Black Stainless
$55.80
480 Customers Have Purchased This Item!
Quickly and easily convert your 1/2″ diameter non-threaded barrel to 5/8″-24 threads so you can attach muzzle brakes and other end-of-barrel accessories.
No machining required! And less expensive than going to a machinist or gunsmith to thread your barrel.
Watch the installation video HERE
Now you can mount any 5/8-24 end-of-barrel accessory on your rifle’s non-threaded 1/2″ barrel—including muzzle brakes, flash suppressors, compensators, sound suppressors, fake flash hiders, fake suppressors or any other legal end of barrel device with this highest-quality barrel thread adapter.
This barrel thread adapter easily attaches to the factory-finished plain muzzle using two set screws.
Thread Adapter Features and Benefits
- Threads: 5/8-24 TPI
- Thread Length: 5/8″
- Bore Depth: .9 inches
- Through Bore: Fits up to .375 caliber
- Outside Diameter: 1 inch
- Stainless steel with MIL-SPEC black oxide finish for years of trouble-free service.
- Slip-on design is held in place with two set screws that remain flush when tightened.
- Less expensive than going to a machinist or gunsmith to thread your barrel.
- Install it yourself in seconds and remove it just as quickly.
- Fits 1/2″ non-threaded barrels that measure exactly .500 inches. If it does not…go HERE
Note: If your rifle has a front sight that is more than 1″ behind the muzzle, this thread adapter will still fit.
| Weight | 5 oz |
|---|---|
| Thread Pattern | 5/8-24 |
Only logged in customers who have purchased this product may leave a review.
Related products
Barrel Shrouds
Note: It is your responsibility to review and follow all United States of America federal, state, and/or local laws and regulations related to the use, possession, purchase and/or ownership of restricted items. And of course, be safe and have fun.
Reviews
There are no reviews yet.