Henry U.S. Survival AR-7 Threaded Barrel Adapter – 1/2-28

Now you can mount any 1/2-28 end-of-barrel accessory on your rifle’s non-threaded barrel—including muzzle brakes, flash suppressors, compensators, sound suppressors, fake flash hiders, fake suppressors or any other legal end of barrel device with this highest-quality barrel thread adapter.

This premium Henry U.S. Survival AR-7 Threaded Barrel Adapter quickly and easily slips on to the non-threaded barrel of your Henry U.S. Survival AR-7. The largest diameter is a little larger than current A2 Birdcage and similar flash hiders.

Once on the barrel, simply tighten the set screw, attach your own end-of-barrel accessory, and start shooting. You now have a fully-threaded barrel, without the cost of going to a machinist or gunsmith to thread your barrel. It’s that simple!

Thread Adapter Features and Benefits

• Fits the Henry U.S. Survival AR-7 style rifle. AKA Henry Survival 22.
  Can fit older styles by other manufacturers, but may need a little clearance added because of “flash” around the front sight
• Threads: 1/2-28 TPI
• Thread Length: 5/8″
• Has a cutout to fit around the front iron sight.
• The largest diameter is a little larger than A2 birdcage-style flash hiders.
• Stainless steel with MIL-SPEC black oxide finish for years of trouble-free service.
• Less expensive than going to a machinist or gunsmith.
• Held in place with two set screws that are flush when tightened.
• Install this thread adapter on your non-threaded barrel in seconds and remove it just as quickly.
• This will fit the AR-7 style rifle ONLY! Don’t even try on something else. If you want something similar, go HERE