2 Point Sling

The Tacticool22 2 Point Sling self adjusts from carrying to use instantaneously.
No toggles, straps, clips or adjustments. Just swing up from the carry position. The enclosed tension system keeps the sling tight like you need it.
Like a Rhodesian Sling or hasty sling of old, but no making a special loop or odd use. The Hasty Sling is demonstrated HERE

2 Point Sling Product Features

• Heavy duty polyester tubular webbing
• Over twice as strong and is much more flexible than flat webbing with a breaking strength of 2800lbs
• No QD sling ends included. This keeps the cost down. Allows YOU to customize the sling how you need
• 2 Slip Lock Slides on each end for redundant security.
• 1 Side Release Buckle for emergency release
• Rapid Cinch technology to adjust size. Simply pull away to adjust larger, or pull towards you to adjust smaller
• Can be locked in place for no accidental movement
• Size adjustment for different requirements. From just a T shirt to front and rear plates
• The internal Tension System allows over 19 inches (48mm) of stretch and load-damping
• Overall length from xxx to xxx before any stretch

2 Point Sling Installation

1. Run the plain ends through your mounted sling loops
2. Run one end through a sling slot in the stock
3. Run the other end through the attached sling loop by the front sight
4. Install one or two QD sling loops. Old school QD with a pin, HK Snap Hook, QD Push Button, Etc.
5. Use Paracord or whatever field expedient attachment you prefer
6. Run each tail of the sling through Slip Lock Slide to ensure they’re locked into position

Typical Carry Positions

1. Off-side Drop / Patrol Ready. Muzzle down
2. Rear sweep. Muzzle up
3. Port Arms. Muzzle up
4. Rear sweep. Muzzle down
5. Port Arms. Muzzle up
6. Climbers carry