Fake Suppressor – Threaded
$49.99 – $59.99
2388 Customers Have Purchased This Item!
This threaded Fake Suppressor gives your firearm the look of a real suppressor, without the expense or waiting period. Fits AR-10, AR-15, M&P15-22, and other rifles with threaded barrels.
Does not quiet your firearm! This is a fake suppressor.
Product Description
The Tacticool22 Fake Suppressor fits AR-10, AR-15, S&W M&P15-22, and other rifles with threaded barrels, and is offered in multiple length and thread pattern configurations.
Fake Suppressor Features
- Lengthens the barrel.
- Black, hard-coat anodized finish to MIL-SPEC Type III.
- Quickly and easily threads onto your barrel.
- Does not quiet the firearm.
- Does not interfere with gas or piston systems.
- Made in the USA.
Fake Suppressor Measurements
We offer multiple measurements and thread options to ensure a proper fit for your firearm. If you’re not sure which options to pick, contact us.
- Length:
- 4.5″
- 6″
- 8″
- Custom length – under 8″
- Threads:
- 1/2″-28 (fits threaded .22, .223, .556, S&W M&P15-22, etc)
- 1/2″-36
- 5/8″-24 (fits threaded .300, .308, etc)
- 9/16″-24
- 37/64″-28
- M14x1 RH
- M14x1 LH
- M16x1 LH
- Custom thread. Please provide your rifle’s thread diameter and TPI in the order notes during checkout.
For example, 1/2-28 = .500 inch diameter, 28 threads per inch.
Additional Information
| Weight | 0.5 lbs |
|---|---|
| Caliber | .22, .223/5.56mm, .25/6.5mm, .30/7.62mm, .308/7.62mm |
| Color | Black |
| Finish | Hardcoat Anodized to MIL-SPEC Type III |
| Firearm Compatibility | AR .308, AR-10, AR-15, Mossberg 715T, Ruger 10/22 Carbine, Ruger SR-22, Smith & Wesson M&P15-22 |
| Material | Aluminum |
| Length | 4.5 Inch, 6 Inch, 8 Inch, Custom Length (Under 8 Inches) |
| Thread Pattern | 37/64-28, M16x1 LH, 1/2-28, 1/2-36, 5/8-24, 9/16-24, M14x1 LH, M14x1 RH, Custom Thread |
1 review for Fake Suppressor – Threaded
Add a review
You must be logged in to post a review.
Measurement Requirements are required ONLY for custom thread and/or Custom Length
Please include the following information in the Order Notes during checkout or email us at [email protected]/* */ immediately after your purchase.
- Custom Length – Due to firearm variations, you must measure your barrel length from the shoulder of the threads back to where you want the barrel shroud to end.
- Custom Thread – Provide the following thread information:
- Thread diameter
- Thread pitch
- Model of firearm
ATTENTION:
You must measure with quality metal calipers or micrometer to ensure a proper fit.
ATTENTION: If you do not provide measurements during checkout, we will send you an email asking for the missing information.
Related products
Custom Firearm Parts
Barrel Shrouds
Custom Firearm Parts
Custom Diameter and Slot Barrel Adapter – to 1/2-28 Thread (Black)
Custom Firearm Parts
Note: It is your responsibility to review and follow all United States of America federal, state, and/or local laws and regulations related to the use, possession, purchase and/or ownership of restricted items. And of course, be safe and have fun.
Billy Dee Williams (verified owner) –
Great product very fast shipping if you want to change the look of it I would go for it.