Slip-On Barrel Shroud for Non-Threaded Barrels
$46.30 – $69.99
3348 Customers Have Purchased This Item!
This Slip-On Barrel Shroud by Tacticool22 gives your gun barrel the finished look you’ve always wanted. Fits AR-10, AR-15, S&W M&P15-22, and other firearms with non-threaded barrels.
They can even go behind your end of barrel device and attach to the non-threaded portion of your barrel.
Here is a short video on how to use calipers – HERE
Barrel shrouds cover (shroud) the barrel. They won’t work on pistols, especially auto loaders because the slide already covers the barrel. If you want something for your pistol, get one of our Fake Suppressors HERE
Product Description
Slip-on Barrel Shroud Features
- Black, hard-coat anodized finish to MIL-SPEC Type III.
- Held in place using a set screw.
- Quickly and easily slides over your barrel.
- Does not lengthen the barrel.
- Does not quiet the firearm.
- Made in the USA.
Barrel Shroud Measurements
We offer multiple measurements and thread options to ensure a proper fit for your firearm. Your rifle’s barrel diameter can be anywhere from .5 up to .8 inch. Just tell us your barrel diameter upon ordering to ensure a proper fit.
If you’re not sure which options to pick, contact us.
- Diameter:
- Outside 1 1/8 inch
- Inside 7/8 inch
- Non-threaded
- Length:
- 4.5″
- 6″ (on backorder)
- 8″
- Custom length – under 8″
- Bore (Barrel Diameter):
- S&W M&P15-22 (we already have the measurement)
- Performance Center S&W M&P 15-22 (we already have the measurement)
- .625 inches (5/8″)
- Custom diameter barrel fit – From .5 inches up to .8 or 20.5mm
Instructions After Ordering Custom Diameter
To ensure a proper fit, please put the required information in the measurements section at the bottom of the checkout page.
- Barrel Diameter – Precise measurement at the muzzle and 1 inch back.
- Caliber
- Firearm Model
Note: Measure using quality metal calipers or a micrometer to ensure a proper fit.
Don’t worry, if you do not provide measurements during checkout, we will send you an email asking for the missing information.
Additional Information
| Weight | 0.5 oz |
|---|---|
| Dimensions | 0.666 × 0.125 × 0.125 in |
| Bore | .625 = 5/8 inch, 3/4" Standard AR Barrel (.750), Performance Center S&W M&P15-22, S&W M&P15-22 (Does Not Fit Performance Center with Fluted Barrel), Custom Bore |
| Caliber | .22, .223/5.56mm, .25/6.5mm, .30/7.62mm, .308/7.62mm |
| Color | Black |
| Finish | Hardcoat Anodized to MIL-SPEC Type III |
| Firearm Compatibility | AR .308, AR-10, AR-15, Mossberg 715T, Ruger 10/22 Carbine, Ruger SR-22, Smith & Wesson M&P15-22 |
| Material | Aluminum |
| Length | 4.5 Inch, 6 Inch, 8 Inch, Custom Length (Under 8 Inches) |
| Thread Pattern | Non-Threaded |
Only logged in customers who have purchased this product may leave a review.
Measurement Requirements are required ONLY for custom Bore and/or Custom Length
Please include the following information in the Order Notes during checkout or email us at [email protected]/* */ immediately after your purchase.
- Muzzle diameter
- Barrel diameter 1 inch from muzzle –
- Custom Length – Due to firearm variations, you must measure your barrel length from the muzzle back to where you want the barrel shroud to end.
You must measure your barrel diameter with quality metal calipers or micrometer to ensure a proper fit.
ATTENTION: If you do not provide measurements during checkout, we will send you an email asking for the missing information. If you provide incorrect measurements and this item does not fit, you will have to pay return shipping. Plus there will be a $20 fee for additional machining and shipping back to you.
Related products
Custom Firearm Parts
Note: It is your responsibility to review and follow all United States of America federal, state, and/or local laws and regulations related to the use, possession, purchase and/or ownership of restricted items. And of course, be safe and have fun.
Reviews
There are no reviews yet.